Skip to main content

Posts

EEE Interview Questions VIII

1. What  is Linear Circuit?      A circuit in which the parameters remains constant with time and do not changes with voltage or current is called Linear Circuit. Linear Circuit always obeys Ohm's law 2. What is non-linear Circuit?      A circuit in which the parameters does not  remains constant with time and changes continuously  with voltage or current is called Linear Circuit. Linear Circuit does not obeys Ohm's law 3. What is Passive Element?      Element which is incapable of generating power but has the ability to store, dissipate or release the power is called passive elements. Resistors, capacitors, Diodes are example for passive elements 4. What is Active Element?     Element which is capable of generating power is called passive elements. Transistors, oscillators, integrated circuits are example for active elements 5.  What is Active Network?      Network w...

Induction Generator

Induction Generator: Induction Generator is a asynchronous Generator that uses the principle of induction motor to generate electricity. Induction Motor as Induction Generator: The induction motor can be used as Induction Generator by making its speed greater than synchronous speed by using Prime mover Conditions for motor to act as generator: Slip produced should be Negative Prime mover torque should be opposite to electrical torque Working: Induction motor can be used as Induction generator by rotating its rotor more than synchronous speed. This  can be attained by using a Prime mover.  In normal motor, the stator is provided with supply, where it produces stator flux, which produces rotor current. Rotor current produces rotor flux opposite to stator flux. This difference produces a positive slip where the stator flux is greater than rotor flux. In Generator, Prime mover is used to rotate rotor greater than synchronous speed with DC excita...

Synchronous Condensor

Synchronous Condensor: In electrical engineering, it is considered as a borderline between a motor and generator with no mechanical load  In other words, it is a DC excited synchronous motor whose shaft is connected to nothing It can compensate either lagging or leading power factor by supplying or absorbing reactive power from the line It is also called as synchronous Condensor or synchronous compensator Working: Kinetic energy stored in motor of machine will help to stable a power system during rapid fluctuations of load  It involves three conditions based on power factor: Under Excitation   Unity or Ideal  Over Excitation  Under excitation: In under excited condition, the machine will operate at lagging power factor  It draws lagging current from the supply line  Lagging power factor can be corrected by supplying reactive power   Reactive power drawn from capacitor bank decreases when grid Voltage decrea...

EEE Interview questions VII

1. What is Flip Flop?      It is an electronic circuit with two stable states that can be used to store binary data. The stored data can be changes by changing the input. It is also called as latching 2. What is transistor? Transistor is an electronic device used to amplify or switch Signal  It is a three terminal device made up of semiconductor material  These terminals are used to connect with external circuit 3. What is NPN transistor? It consists of one P doped semiconductor material in between two N doped semiconductor materials It passes electrons from emitter to collector so the current flow from collector to emitter  The emitter emits electrons into base which controls number of electrons that emitter emits 4. What is PNP transistor? It consists of  N doped semiconductor material in between two P doped semiconductor layer It emits electrons from collector to emitter so the current flow from emitter to collecto...

EEE interview questions VI

1. What is Rectifier?      It is an electrical device which converts Alternating current into Direct current which allows the current to flow in only one direction by using one or more PN junction diode. 2. What is Phase Controlled Rectifier?       Phase Controlled Rectifier converts AC to DC by using thyristor instead of diode. As diode has no control over output, where as SCR can control it's output by adjusting firing angle 3. When Rectifier will acts as an inverter?       When the phase angle alpha becomes greater than 90° rectifier will acts as an inverter 4. What is firing angle?      SCR doesnot turn on until anode Voltage becomes greater than cathode Voltage. To make anode Voltage greater than cathode Voltage pulse Signal are applied to gate of SCR. The angle at which thyristor gate is fired with pulse Signal is called as firing angle 5. What is triggering in SCR?     SCR has two stable s...

Commutator

Definition: It is defined as the rotating electrical device connected to motor or generator through which an electrical connection can be made  to the load such that it always reverses the current that flows between the motor or generator and the load. In other words, commutator is defined as the splitting device used to keep torque in DC motor from reversing every time, when the coil moves to the plane perpendicular to the magnetic field. Application of commutator:   It is used in : DC motor DC generator Universal motors Use of commutator in motor: In motor, commutator applies the electrical current to the windings, then it reverses these current flow for each half cycle in the rotating windings, thus a steady rotating force called torque is produced to rotate the load Use of commutator in generator :  In generator, commutator picks off the current from the windings and reverses these current for every half cycle such that it converts current fr...

EEE Interview Questions - V

1. What is Power Electronics?     Power Electronics is the branch of electronics which deals with the control and conversion of electric signals. It uses switches, semiconductor devices for control and conversion. 2. What are the Semiconductor Devices? Bipolor Junction Transistor(BJT) Metal Oxide Semiconductor Field Effect Transistor(MOSFET) Power Diode Insulated-Gate Bipolor Transistor (IGBT) Thyristor or Silicon Controlled Rectifier(SCR) 3. What are current controlled power electronic devices? BJT SCR GTO GTR 4. What are voltage controlled power electronics device? MOSFET IGBT MCT IGCT SIT 5 . How BJT is considered as a current control device?     BJT is a current controlled device because its output characteristics are determined by its input characteristics as the base current controls the flow of current between the emitter and collector 6. How FET devices are considered as a voltage controlled device?  ...